LOW-RISE

VLXS7 is perfect for high volume tire and brake work on a wide variety of vehicles. Each lift comes standard with a set of four rubber blocks for quick access to lower profile and unibody frame vehicles. Blocks are 1 1/2″ and 3″ in height.

Handle All Your Brake, Exhaust and Any Job Needing Clear Access With Our Low Rise Lifts!

  • Driver-over ramps and side rails support wider vehicles on approach
  • Dual lifting cylinders for smooth lifting
  • (4) heat resistant pads
  • Three-position wheel spotting dish
  • 7,000 lbs. capacity
  • (4) 1 1/2″ rubber blocks
  • (4) 3″ rubber blocks
  • Optional set of 4 three-position adapters
  • ALI Gold Certified (VLXS7000)
Ask a Question About this Product
  • Features & Benefits
  • Videos
  • Literature/Downloads
Specifications VLXS7
Rise High Step/Tall Pad 24 3/4″
Rise Short Pad 23 1/4″
Rise Flat 21 3/4″
Length Overall 90 1/2″
Width Overall 78 1/2″
Width Between Platforms 22 3/4″
Length of Platform 51 1/4″
Length of Pad 17″
Outside Width Of Platforms 70 3/4″
Horizontal Movement (during rise) 16″
Collapsed Height 4″
Locking Leg Heights 13 3/8″ – 17 3/8″ – 21 3/8″
Lifting Capacity 7,000 lbs.
Voltage Single Phase 115v
Time of Full Rise 40 seconds